Chimney Repairs Dumfries
Damp showing near a chimney stack? Tell us what you have noticed and we will visit to survey the roof, then send you a free quote in writing.
Finance from £22 a weekSubject to status. Terms apply.
Chimney repair and roof-level chimney leaks
A chimney gathers roof covering, lead, mortar and stonework into one exposed spot, so damp beside the stack could come from any of them. More about our work: Dumfries roofing services.
We look at the stack, flashing, flaunching, pointing, capping and the covering next to it together, instead of guessing from the stain indoors.
Many older Dumfries buildings have sandstone stacks, where repointing often has to be planned with the lead around them so the stack and roof shed water as a single detail.
Last updated 17 November 2026
What can fail around a chimney stack
The mark indoors may be some distance from the real fault, so the stack and its junction with the roof are checked as one area.
- Chimney flashingWhere the stack meets the roof, soakers and flashing have to turn rainwater back onto the slope.
- Weathered pointingOpen joints let rain into the stack and the roof details beside it.
- Damaged flaunchingThe mortar bed round the pots may need renewing once it has cracked.

- Loose or damaged masonryStonework that has changed may call for repair or even a rebuild.
- Capping and terminalsThe very top of the chimney is looked at as part of the overall check.
How chimney leaks are traced
Water can get in through lead, open joints, damaged flaunching or a fault in the covering beside the stack, and the stain inside does not always show which.
We assess the stack, the junction with the roof, the flashing and the nearby covering together before suggesting a repair.
- How the masonry and roof-level pointing look.
- Flashing, soakers and the materials around the stack.
- Any change to the covering beside it.
Repointing, rebuilding and capping
The work can run from pointing and flashing repairs at roof level to larger masonry repair, a rebuild or a new cap. What is needed follows from the condition we find and from safe access.
Where the chimney is not the real problem, lead elsewhere and repointing elsewhere on the roof are covered on their own pages.
For more detail, see Lead flashing and leadwork.
- Height, condition and stability of the stack.
- The roof junctions and flashing details.
- The access needed to do the work safely.
Chimney repairs for Dumfries homes
Dumfries has many traditional roofs where sandstone stacks, grey slate and cast-iron rainwater goods form part of the established roofscape. Exposed stacks weather on every face.
The height of the stack, the state of the masonry, the lead, the pots, nearby coverings and access all feed into the quotation.
A sound chimney repair may mean coordinating pointing, flaunching, lead and slate work, because mending one open joint can leave another way in for water.
Common questions
The cause could be flashing, pointing, flaunching, stonework or the covering beside the stack, and it takes an inspection to separate them.
Yes, where it has weathered or failed, along with a check of the stack and its junction with the roof.
This page covers the flashing at the stack. Lead elsewhere on the roof is dealt with on the lead flashing page.
The height and condition of the stack, how much pointing, flashing or masonry work is needed and the access required.
Tell us about the roof
Tell us what you have seen, the property’s location and the service that fits best.
